打印 
打印
Axle Load Scale
[ MS-KTEN ]
Purpose:
The MS-KTEN type on the move axle load scale weighs the axle load while the vehicle passes through (max 5 km/h). It stores, prints or forward the results of the weighings to a computer.
Disclaimer:
The scale is only certifiable for weighing the individual axles’ loads, but not for the total weight.
Construction:
- Welded steel pit
- Weighing platform: MS-TEN type welded steel bridge-construction
- Electronics:
- In case of MS-01/Mxx type electronics the data processing and handling is done by a connected computer with Porta 4/TEN program.
- In case of MS-MT/TEN type electronics, the measured axle load and the calculated total weight are displayed on its own screen. Before and after the weighing, instructions help the operator’s job.
Tech Specs:
| Capacity: | max.: 20.000 kg |
| Weighing capacity: |
max.: 15.000 kg |
| Axle load: | max.:7.500 kg |
| Resolution: | 3.000 |
| Division: | 5 kg |
| Static accuracy: | ± 10 kg |
| Dynamic accuracy: | ± 100 kg (speed < 5 km/h) |
| Pass through speed: | max.: 5 km/h |
| Weighing surface: | 2961 mm (116.6 in) x 640 mm (25.2 in) (length x width) |
| Size: | 3145 mm (123.8 in) x 804 mm (31.7 in) x 415 mm (16.3 in) (length x width x height) |
| Protection: | IP-69 protected load cells |
Powered by Yii Framework.