产品网页地址: http://oldweb.metrisoft.hu/cn/p/4
Axle Load Scale
The MS-KTEN type on the move axle load scale weighs the axle load while the vehicle passes through (max 5 km/h). It stores, prints or forward the results of the weighings to a computer.
Új
Axle Load Scale
[ MS-KTEN ]
Purpose:
The MS-KTEN type on the move axle load scale weighs the axle load while the vehicle passes through (max 5 km/h). It stores, prints or forward the results of the weighings to a computer.
Disclaimer:
The scale is only certifiable for weighing the individual axles’ loads, but not for the total weight.
Construction:
- Welded steel pit
- Weighing platform: MS-TEN type welded steel bridge-construction
- Electronics:
- In case of MS-01/Mxx type electronics the data processing and handling is done by a connected computer with Porta 4/TEN program.
- In case of MS-MT/TEN type electronics, the measured axle load and the calculated total weight are displayed on its own screen. Before and after the weighing, instructions help the operator’s job.
Tech Specs:
Capacity: |
max.: 20.000 kg |
Weighing capacity:
|
max.: 15.000 kg |
Axle load: |
max.:7.500 kg |
Resolution: |
3.000 |
Division: |
5 kg |
Static accuracy: |
± 10 kg |
Dynamic accuracy: |
± 100 kg (speed < 5 km/h) |
Pass through speed: |
max.: 5 km/h |
Weighing surface: |
2961 mm (116.6 in) x 640 mm (25.2 in) (length x width) |
Size: |
3145 mm (123.8 in) x 804 mm (31.7 in) x 415 mm (16.3 in) (length x width x height) |
Protection: |
IP-69 protected load cells |
产品网页地址: http://oldweb.metrisoft.hu/cn/p/4