产品网页地址: http://oldweb.metrisoft.hu/cn/p/43
Weighing Instrument without Display
The MS-ADT1 is a weighing instrument without display and controls, that can snap on a "C" rail. It was developed for weighing tasks where the scale system is joined in a PC or a PLC, and every action is performed through these. The limit value outputs, separated by opto connector, connect the other controller units. On its separated analog current output creates 4-20 mA in relation with the weight. All of the function of the instrument are accessible on both communication interface.
Új
Weighing Instrument without Display
[ MS-ADT1 ]
Purpose:
The MS-ADT1 is a weighing instrument without display and controls, that can snap on a "C" rail. It was developed for weighing tasks where the scale system is joined in a PC or a PLC, and every action is performed through these. The limit value outputs, separated by opto connector, connect the other controller units. On its separated analog current output creates 4-20 mA in relation with the weight. All of the function of the instrument are accessible on both communication interface.
Features:
- Operating voltage: 15 - 24 VDC
- Consumed voltage: 2,5 VA
- Load cells: 4 x 350 ?
- RS232 interface
- RS422/485 interface
- 2 separated limit value output (in case of RS485)
- Analog current output (4-20 mA)
- Metrisoft or MODBUS protocol
- Parameterizable through serial port
Options:
- 4 inputs separated by opto connectors
- 5 outputs separated by opto connectors
- Display:
- Alfanumeric LCD
- 13 mm (0.5 in) tall 7-segment LED display
产品网页地址: http://oldweb.metrisoft.hu/cn/p/43